Brass Slotted Set Screws to DIN/ISO · Jamnagar, India

DIN 427 Brass Slotted Set Screw (Flat-Cone Point)

Slotted screw, chamfered (flat-cone) point with pilot pin — turned in brass to standard and to your drawing.

Home / Products / Standard Parts / Set Screws / DIN 427

A DIN 427 screw is a partially threaded slotted screw with a reduced-diameter pilot pin ending in a chamfered (flat-cone) tip, used to locate or seat against a prepared surface without cutting a deep indent; it corresponds to ISO 2342. Brassland machines it from free-cutting brass CW617N (CuZn40Pb2) to the standard and to your drawing, as part of our set screws programme.

DIN 427 Brass Slotted Set Screw (Flat-Cone Point) — dimensioned engineering drawing

DIN 427 — engineering drawing (Brassland).

Specification

Standard	DIN 427 (ISO 2342)
Type	Slotted screw, chamfered (flat-cone) point with pilot pin
Thread	M3–M10; larger on request
Material	CW617N (CuZn40Pb2); CW614N or lead-free CW724R on request
Certificate	EN 10204 3.1 per shipment; 3.2 on request

Datasheet — dimensions to DIN 427 (ISO 2342)

Thread d	Slot width n	Slot depth t	Pilot-pin length b
M3	0.4	0.8	3.6
M4	0.6	1.12	4.8
M5	0.8	1.28	6.0
M6	1.0	1.6	7.8
M8	1.2	2.0	9.6
M10	1.6	2.4	12.0

Dimensions in mm to DIN 427 (ISO 2342). n = slot width, t = slot depth, b = pilot-pin length. The screw is partially threaded with a reduced-diameter pin ending in a chamfered (flat-cone) tip; the pin/tip diameter is to DIN 427 and confirmed on the drawing at quotation.

Applications

Typical applications include locating or seating a screw against a prepared surface or into a shallow recess without a deep indent, and adjustable stops where a stepped pilot is wanted. All parts are made to order, so size, thread, finish and certification are tailored to your specification.

Product

Set Screws Catalogue

Socket & slotted grub screws.

View →Material

CW617N (CuZn40Pb2)

Hot-stamping / sealing brass.

View →Material

CW724R Lead-Free

RoHS / potable option.

View →Industry

Cable Grippers

Grub screws clamp cable.

View →Industry

Switchgear & Electrical

Lock conductors/terminals.

View →Guide

Thread Standards

Metric / BSP / pipe threads.

View →

How it works

Send a drawing or sample.
Quote in 24 hours.

Give the standard, thread and quantity. We are a brass turned-parts manufacturer in Jamnagar, India, exporting to 40+ countries.

Get a Quote →Contact Us

Frequently asked questions

How is DIN 427 different from a normal set screw?

It is only partially threaded and has a reduced-diameter pilot pin ending in a chamfered (flat-cone) tip, where DIN 551/438 are fully threaded with a flat or cup point.

What drive does DIN 427 use?

A straight screwdriver slot.

Is DIN 427 the same as ISO 2342?

Yes — DIN 427 corresponds to ISO 2342 (slotted screw with chamfered end and reduced pilot).

Available in brass?

Yes — turned in brass (CW617N/CW614N) to order.

← All Set Screws