From Our Shop Floor
Standoffs & Spacers
PCB mounting hardware
Threaded Inserts
Heat-set & press-fit
PCB Press-Fit Terminals
Solder & press-fit pins
RF / Coaxial Connector Bodies
SMA, BNC, N-type
Electronics & PCB Assembly
Hex standoffs, threaded inserts, terminal pins, press-fit terminals, and precision turned connectors — machined in brass for machinability and corrosion resistance, or in copper (C11000) where high conductivity is required.
A sample of the precision brass components we turn and mill every day — finished complete and inspected in-house, then shipped to OEM and Tier-1 customers worldwide.
All parts made to your drawings. Email info [at] brassland [dot] com to request a quote.
Brassland is a precision brass-component manufacturer in Jamnagar, India, supplying turned and milled PCB and enclosure hardware to electronics OEMs in 40+ countries. We machine hex standoffs (M2–M6), threaded inserts for plastic enclosures, terminal and press-fit pins, RF and connector bodies, pillars and ferrules — held to about ±0.02 mm on Swiss CNC — from CW614N free-machining brass for press-in parts and lead-free CW724R for RoHS-critical EEE, with tin, nickel or gold plating. Every part is made to your drawing and inspected in-house under our ISO 9001, ISO 14001 and ISO 45001 systems. Choosing the grade? See our electrical alloy guide →
Male-female, female-female, and male-male hex standoffs for PCB mounting. M2, M2.5, M3, M4, M5, M6 thread range. Custom lengths.
Heat-set, press-fit, and knurled brass inserts for PCB enclosures and electronic housings moulded in ABS, PC, nylon.
Precision turned brass terminal pins and contact elements with gold, silver, or tin plating for low-resistance contact surfaces.
Turned brass press-fit terminals and solder pins for direct board mounting — eliminating soldering on through-hole connections. Tin or gold plated.
Precision machined brass connector bodies, shells, and coupling rings for RF/microwave connectors — machined to your drawing for SMA, BNC and N-type designs.
Solid brass threaded pillars and cable ferrules for terminal blocks, busbars, and earthing connections.
Material matched to the job — machinability, conductivity, and reliable plated contacts.
Brass cuts cleanly for fine threads, knurls and small diameters — economical for high-volume PCB hardware.
C11000 copper for current-carrying contacts and terminals; brass for structural standoffs and housings.
Accepts tin, nickel, silver and gold plating for low-resistance contacts, corrosion protection and shelf life.
Tight tolerances held on Swiss turning — essential for press-fit, connector and contact-fit reliability.
From Our Shop Floor
Certified brass / copper rod to EN 12164 / 12166, XRF-verified on every heat before production.
Pins, standoffs and inserts turned complete — threading, knurling and parting in a single cycle.
Tin, nickel, silver or gold applied to your specification via qualified plating partners.
Thread gauging, optical / CMM measurement and 100% checks on critical dimensions before dispatch.
Standard production parameters — non-standard requirements always welcome.
| Parameter | Standard Range | Notes |
|---|---|---|
| Thread sizes | M2 – M12 · #2-56 – #10 UNC | Metric & unified; custom pitch available |
| Diameter range | Ø1 – Ø30 mm | Swiss turning for small precision parts |
| Tolerance | ±0.01 – ±0.05 mm by process | Swiss tighter; CNC IT6–IT8 |
| Surface finish | Ra 0.4 – 1.6 µm | Finer on request |
| Plating | Tin · Nickel · Silver · Gold | To your spec, via qualified platers |
| Materials | CW617N · CW614N brass · C11000 copper | Matched to the part's function |
| Compliance | RoHS 2 · REACH | Declarations supplied with order |
| Minimum order | No strict MOQ | First orders typically from ~1,000 pcs |
| Lead time | 3 – 5 weeks | From approved drawing; samples sooner |
RF connector bodies, antenna parts, rack and patch-panel hardware.
Terminal pins, standoffs and inserts for PLCs, drives and control panels.
Precision turned contacts, bushings and housings for measurement devices.
High-volume standoffs, threaded inserts and fasteners for moulded housings.
Connector and sensor hardware in ELV-compliant alloys.
Threaded pillars, heat-path hardware and driver-board mounting parts.
Material choice depends on the part's function — we'll advise on the right grade.
General-purpose grade for standoffs, pillars and housings. Excellent machinability and good corrosion resistance.
Highest machinability for small, intricate precision parts — terminal pins, press-fit terminals and connector details.
Electrolytic-tough-pitch copper (100% IACS) for current-carrying contacts, busbar tabs and grounding parts. RoHS 2 — no exemption needed.
Other Brassland components for electrical & electronic assemblies.
Brassland manufactures to the published EN, ISO and ASTM specifications below. Mill certificates per EN 10204 Type 3.1 are supplied as standard; Type 3.2 (third-party witnessed) available on request. Open any link to verify the standard directly with the publishing body.
Last reviewed: May 2026. All Brassland products are made to order — please confirm grade, surface finish, plating and packaging requirements at quotation stage. Standards listed above are referenced; production lots are released against the EN 10204 Type 3.1 inspection certificate accompanying each shipment.