DIN 16903 Form S

Home / Products / Moulding Inserts / DIN 16903 Form S

The DIN 16903 Form S is a brass mould-in threaded insert with a round body, with shoulder, with through-hole, knurled on its outside so that when it is placed in the injection mould and plastic is moulded around it, it locks into the plastic part and gives a durable metric thread; the through-hole lets a screw pass completely through the insert; the round body suits lighter loads and tighter spacing; and the shoulder sets seating depth with a flush bearing face. Brassland machines it from free-cutting brass CW614N (CuZn39Pb3) — or lead-free CW724R — to DIN 16903, as part of our moulding-insert programme.

DIN 16903 Form S — dimensioned drawing (Brassland).

Specification

Form S at a glance

DIN 16903 Form S is the round-body, with shoulder, through-hole member of the DIN 16903 mould-in insert family, listed in 10 metric sizes from M2 to M12. Within the family, the open-ended version is Form D; the closed-floor (blind) version is Form H; the same body without a shoulder is Form Q; its hexagonal-body counterpart is Form R.

Datasheet — dimensions to DIN 16903

Applications

Form S is specified wherever an injection-moulded plastic part needs a strong, reusable metal thread with the through-hole geometry shown above — typical sectors and resin guidance are on the DIN 16903 hub.

Related pages

Other DIN 16903 forms

DIN 16903 Form A · DIN 16903 Form B · DIN 16903 Form C · DIN 16903 Form D · DIN 16903 Form E · DIN 16903 Form F · DIN 16903 Form G · DIN 16903 Form H · DIN 16903 Form P · DIN 16903 Form Q · DIN 16903 Form R · DIN 16903 Form T · DIN 16903 Form U · the DIN 16903 hub.

Frequently asked questions